This is our favorite time of year as crafters. We have fun making what we love best and sharing our creations with everyone during this holiday season! My latest project is one of the cutest things I've ever made - A Santa Bow Wreath or Wall Hanging and it's so easy to make!Materials needed:
1 1/2 yards of 5 1/2' wide ribbon
1/2 yard faux fur trim
18"x 12" sheet of black stiff felt
Glue/Hot glue gun
Cardboard
Boot pattern
Glitter stick-on foam sheet
Scissors
Bowdabra, wire and wandTo begin, find a boot pattern online and save to Word. Adjust the size to line up with the width of the ribbon. Trace two boot patterns on cardboard (opposite facings), and glue them between two pieces of black stiff felt.Fold a 24" piece of bow wire and place in the bowdabra. Insert an 18" piece of ribbon for the "santa legs."Take the remaining yard of ribbon, folding the ends together with loops on both sides and insert into the bowdabra.While all of the ribbon is still in, glue on faux fur trim to ends of the ribbon legs.Next glue on the felt boots. It so easy to assemble this while everything is still in the Bowdabra. After scrunching down the ribbon, take the two loose wire ends and push them through the wire loop, pulling tightly, lifting out and tying the wire in a knot to the back of the bow.
The excess bow wire, looped and tied, will be used as a hanger.
Glue strips of cardboard in a V shape to the back to prevent the legs from moving.And finally, cut out a 3" square of glitter foam sheet with a one inch square opening, adding a piece of black felt over the opening and gluing on top of the bow for the buckle.This is just too cute!Original article and pictures take http://www.hometalk.com/11467083/santa-bow-wreath-wall-hanging site
Комментариев нет:
Отправить комментарий