DIY 3 Drawer Nightstand - Restoration Hardware Knockoff

I was cruising the Restoration Hardware catalog looking for some ideas for my next build, when I ran into the Printmaker's Series. I was immediately in love and started working on my own version. With sleek lines, full extension drawers and 3 full extension drawers, the DIY 3 Drawer Nightstand is a beauty and you can make your own!
Check out the overview here then follow the link at the bottom for the full walkthrough and downloadable plans













The nightstand body is made from 1x6's and 2x2's.





Lots and lots of pocket holes hold everything tight and make assembly a snap.





I got a little creative when attaching the top of the nightstand. At least those weights come in handy for something!





The drawers are made from 1x4's and are quick to make with a few simple tricks.





This little jig makes mounting the full extension slides much easier and repeatable!





I stained the whole thing with a Kona stain and finished it with Arm-R-Seal Urethane.





Inset drawer fronts are a little tricky, but add a ton of class and sophistication to the piece.





Go to my site FixThisBuildThat.com for full downloadable plans!






Original article and pictures take http://www.hometalk.com/11320297/diy-3-drawer-nightstand-restoration-hardware-knockoff site